TAV KIT 2.0 — COMPATIBILITY CHECK

Is your bike
kit-ready?

3 quick photos. Our AI pre-qualifies your bike so you know exactly what you're getting before you order.

1
BIKE
2
DERAILLEUR
3
BOTTOM BRACKET
4
REPORT
STEP 01 OF 03

Photo of your bicycle

A full side-on shot. We use this to identify your bike type, brand, frame geometry, and battery placement options.
Best shot: Full side profile, whole bike visible, good daylight. Include the down tube and chainstay area clearly.

Upload bike photo

JPG · PNG · WEBP

Your bike
TAV AI — BIKE ANALYSIS
Powered by Claude
STEP 02 OF 03

Photo of your derailleur

The rear derailleur tells us your drivetrain speed and whether the chainring clearance will work with the TAV mid-drive motor.
Best shot: Rear derailleur clearly visible, close enough to see cage length and brand markings. Show the cassette too if possible.

Upload derailleur photo

JPG · PNG · WEBP

Derailleur
TAV AI — DRIVETRAIN ANALYSIS
Powered by Claude
STEP 03 OF 03 — CRITICAL

Close-up of the bottom bracket

The TAV mid-drive motor only fits 68mm and 73mm threaded bottom brackets. Fat bike BB shells (100mm+) are not compatible.
Critical: Get close. Show the BB shell where crank arms meet the frame. Remove the front derailleur if it blocks the view.

Upload bottom bracket photo

JPG · PNG · WEBP — as close as possible

Bottom bracket
TAV AI — BB SHELL ANALYSIS
Critical compatibility gate

Human review required

Our AI could not confirm your BB shell width. Please contact our team with all 3 photos for manual verification.

Send to TAV team for manual check

Our technicians review your 3 photos and confirm compatibility. Please save and attach all 3 photos to the WhatsApp message.

Send all 3 photos to TAV team
Compatibility report
Analysing...
RECOMMENDED KIT
TAV Kit 2.0 — Standard
₹24,999
36V 250W mid-drive motor · Intelligent display · Integrated lock & key